 | John Butler Johnson - 1898 - 886 páginas
...specified in paragraph No. 4. It is shown in Fig. 039. 9. Number and Location of Tensile Specimens. — The number of standard test specimens shall depend...A test piece shall be cut cold from a coupon to be moulded and cast on some portion of one or more castings from each melt or blow or from the sink-heads... | |
 | John Butler Johnson - 1898 - 906 páginas
...specified in paragraph No. 4. It is shown in Fig. 639. 9. Number and Location of Tensile Specimens. — The number of standard test specimens shall depend...castings. A test piece shall be cut cold from a coupon to he moulded and cast on some portion of one or more castings from each melt or blow or from the sink-heads... | |
 | John Butler Johnson - 1898 - 906 páginas
...specified in paragraph No. 4. It is shown in Fig. 639. 9. Number and Location of Tensile Specimens. — The number of standard test specimens shall depend...upon the character and importance of the castings. A teat piece shall be cut cold from a coupon to bo moulded and cast ou some portion of one or more castings... | |
 | Albert Ladd Colby - 1900 - 108 páginas
...determine the physical properties specified in paragraph No. 4. It is shown in the following sketch: 9. The number of standard test specimens shall depend...and importance of the castings. A test piece shall Number and be cut cold from a coupon to be molded and cast on some orrensMe portion of one or more... | |
 | American Society of Mechanical Engineers - 1902 - 982 páginas
...the followiug sketch : PIG 270. Number and Location of Tensile Specimens. 9. The number of ntandard test specimens shall depend upon the character and...A test piece shall be cut cold from a coupon to be moulded and cast on some portion of one or more castings from each melt or blow, or from the sink-heads... | |
 | Harry Huse Campbell - 1903 - 906 páginas
...the physical properties specified in paragraph Xo. 4. It has already been shown in Fig. XVIII-B. 9. The number of standard test specimens shall depend...be cut cold from a coupon to be molded and cast on Number and ' Location oi sonic portion of one or more castings from each melt Tenrile Specimens QJ.... | |
 | American Society of Mechanical Engineers - 1904 - 1300 páginas
...requirements. Soft Cast Steel. Physical Test. Test pieces for the physical test may be cut cold from a coupon, molded and cast on some portion of one or more castings from each melt, or from a sink head, riser or sprue, on such castings. The test piece should be fashioned so as to give... | |
 | American Society of Civil Engineers - 1904 - 780 páginas
...depend on the character and importance of the castings. Specimens shall be cut cold from coupons moulded and cast on some portion of one or more castings from each melt, or from the sink-heads, if the heads are of sufficient size. The coupon or sink-head, so used, shall be... | |
 | Gaetano Lanza - 1905 - 978 páginas
...physical properties specified in paragraph No. 4. It Tensile Test, is shown in Fig. i. (See page 398.) 9. The number of standard test specimens shall depend...A test piece shall be cut cold from a coupon to be moulded and cast on some portion of one or more castings from each melt "\mm*. Spec~ or blow or from... | |
 | Gaetano Lanza - 1905 - 980 páginas
...Fig. 1. (See page 398.) 9. The number of standard test specimens shall depend upon the character ajid importance of the castings. A test piece shall be cut cold from a coupon to be moulded and cast on some portion of one or more castings from each melt or blow or from the sink-heads... | |
| |
Specimens shall be cut cold from coupons molded and cast on some portion of one or more castings from each melt or from the sink heads, if the heads are of sufficient size. The coupon or sink head, so used, shall be annealed with the casting before it... 
