## Mensuration of Lines, Areas, Surfaces, and Volumes ...1856 |

### Dentro del libro

Resultados 1-5 de 6

Página 12

...

...

**horizontal line**; while the upper end falls to a height of 3 feet the lower one slides 3 feet ; find the height of the ladder in its first position . 20. A ladder , 45 feet long , is placed with one end against an upright wall , and the ... Página 91

...

...

**horizontal**, and the heights in a vertical**line**, observing that the scale of distances is much less than the scale of heights , in order to show the undulations of the ground more distinctly . 87.57 ( Centre of Turnpike Road . LAND ... Página 108

...

...

**horizontal lines**1 , 2 , 3 , & c . , are the half - breadth lines , or ordinates , in the 1st , 2nd , 3rd , & c . , horizontal planes . The small areas forward and aft are taken to estimate the solids ( a ) and ( b ) Fig . 1 , which are ... Página 110

... line before , and RQ the water - line after , the vessel has been inclined . By the principles of hydrostatics ...

... line before , and RQ the water - line after , the vessel has been inclined . By the principles of hydrostatics ...

**horizontal lines**1 , 3 , 6 , 9 , and 11 are measured by scale from each section on the Body Plan . The horizontal ... Página 112

...

...

**line**; but if v , is greater than v2 , then the point S is determined from the equation OS = q - r 6 ( A + B ) And if v be put equal to the volume of the wedge QS B , then v is determined ...**horizontal**distance of 112 SIMPSON'S**RULE**.### Otras ediciones - Ver todas

### Términos y frases comunes

15 feet 9 feet 9 inches angle and area ANSWERS TO EXAMPLES base centre of gravity chains circle is equal circumscribed circles common interval cone cubic feet cubic foot curve in Example cylinder diameter and height displacement distance divided ellipse EXAMPLES IN PROB feet 6 inches feet 9 feet pitch find its area find its volume find the angle find the area Find the centre Find the diameter find the length Find the volume Find the weight foot length formula horizontal line inches diameter inches length internal diameters knots per hour line A B measured metacentric parabola paraboloid perpendicular PROBLEM radius revolutions per minute Riga fir Rule.-Multiply ship Simpson's rule solid solid of revolution square feet square yards straight line three sides tons versed sine vertical section vessel volume and surface

### Pasajes populares

Página xv - LET it be granted that a straight line may be drawn from any one point to any other point.

Página xiii - When a straight line standing on another straight line makes the adjacent angles equal to one another, each of the angles is called a right angle ; and the straight line which stands on the other is called a perpendicular to it.

Página xii - A plane superficies is that in which any two points being taken, the straight line between them lies wholly in that superficies. VIII. " A plane angle is the inclination of two lines to one " another in a plane, which meet together, but are not

Página xv - An oblong is that which has all its angles right angles, but has not all its sides equal.

Página xii - When several angles are at one point B, any one of them is expressed by three letters, of which the letter that is at vertex of the angle, that is, at the point in which the straight lines that contain the angle meet one another, is put between the other two letters, and one of these two is somewhere upon one of those straight...

Página xii - A plane rectilineal angle is the inclination of two straight lines to one another, -which meet together, but are not in the same straight line.

Página xiv - Of three-sided figures, an equilateral triangle is that which has three equal sides.

Página xvi - If a straight line meets two straight lines, so as to make the two interior angles on the same side of it taken together less than two right angles...

Página xiii - A circle is a plane figure contained by one line, which is called the circumference, and is such, that all straight lines drawn from a certain point within the figure to the circumference are equal to one another : 16. And this point is called the centre of the circle. 17. A diameter of a circle is a straight line drawn through the centre, and terminated both ways by the circumference.

Página xvi - Magnitudes which coincide with one another, that is, which exactly fill the same space, are equal to one another.